The opening and closing member of the gate valve is a gate. The direction of movement of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully open and fully closed, and cannot be adjusted and throttled.

Knife gate valve is kind of gate valve,but there is still have difference between gate valve and knife gate valve.The gate valve is a gate of the opening and closing part. The direction of movement of the gate is perpendicular to the direction of the fluid.

Compared with the gate valve, the globe valve has the advantages of simple structure, good sealing performance and convenient manufacturing and maintenance; the disadvantage is that the liquid resistance is large, and the opening and closing forces are large.

The gate valve refers to the valve that the closing part (gate) moves vertically along the channel axis. It is mainly used as the cutting medium in the pipeline, that is, it is fully open or fully closed.Check valve is automatically to open and close via media pass through.

Butterfly valves and gate valves are indispensable components in fluid pipelines, and they have a very wide range of applications. There is a difference in the function of the two, but the butterfly valve and the gate valve are more different. The most difference is appearance.

The screw threads of NRS gate valve lift the gate are exposed to fluid being controlled by the valve. This can cause problems if the fluids tend to foul the threads. So the non risint stem gate valve are usually on the clean liquid or gases.Rising stem gate valve have the threads external to the valve.