The double offset butterfly valve is gradually improved by the ordinary butterfly valve to adapt to different working conditions. The earliest butterfly valve structure is mainly the center door panel structure, similar to the adjustment butterfly valve, that is, the axis of the valve stem and the butterfly plate coincides with the center of the valve body pipe.

The triple offset butterfly valve has a slanting circular shape (the third eccentricity of the so-called triple eccentricity) except that the wide rod and the valve plate have two eccentricities.

The valve stem axis simultaneously deviates from the disc center and the body center, and the valve seat turns the axis and the valve body channel axis has certain Angle, is called the Triple offset butterfly valve

Compared with other valves, the butterfly valve has a simpler structure. It is smaller in size, lighter in weight, and has fewer components. It relies on several key components to form a butterfly valve, but it has achieved better use.

The butterfly valve is suitable for flow regulation. Since the pressure loss of the butterfly valve in the pipeline is relatively large, it should also be considered that the butterfly plate is subjected to the firmness of the pressure of the pipeline medium when it is closed.

The butterfly valve has a small flow resistance when fully opened. When the opening is between about 15° and 70°, sensitive flow control is possible, so the application of butterfly valves is very common in the field of large-diameter adjustment.

The floating ball valve has a simple structure and good sealing performance, but the load of the ball subjected to the working medium is all transmitted to the outlet sealing ring, so it is necessary to consider whether the sealing ring material can withstand the working load of the spherical medium.